READ ONLINE NOW
Online
Issue 94
0

DEALING WITH NOISE LEAKAGE AT HYDE PARK FESTIVAL

By

22 July 2014

Hyde-Park_3069-BST-Hyde-Park---McBusted-copy
McBusted onstage

Proving last year that London’s controversial Hyde Park festival site could be uniquely protected from noise leakage into the surrounding neighbourhood by deploying Martin Audio’s MLA technology, promoters AEG Live adopted a similar solution for this year’s festival — but with enhancements.

For this year’s fest, Martin Audio’s R&D Director, Jason Baird, was determined that he could optimise the set-up to eke out another 3dB at front-of-house without increasing off-site pollution. As a result, 102dB(A) was achieved for McBusted, with 73dB(A) recorded offsite, comfortably within the maximum allowable of 75dB(A), while both Tom Jones (during his more strident numbers) and Black Sabbath nudged 103dB(A).

Baird explained that he began testing his idea three months earlier, and was able to prove it on the Glastonbury Festival delay rig, the week before.

“We conducted the propagation tests based on what we learnt last time around,” he said. One of the key off-site measurement points identified by both Westminster Council and acoustics specialists, Vanguardia at Hyde Park was on top of flats in Mayfair’s nearby Upper Brook Street. “When I visited the property last year I was able to look at the complete spectrum of the signal,” says Baird. “You could hear there was only LF and low mid that was contributing to the A-weight measurements and we realised that if we could reduce that frequency band we could have a better differential.”

His R&D team set to work on the optimisation routines across the full frequency range to improve the differential between on- and off-site levels without extending latency — and this trial optimiSation will in time feature in new data firmware. While Baird maintains that testing will remain ongoing he says the success at Glastonbury gave him the confidence to deploy it on additional arrays in Hyde Park including house left side hang and the two delays nearest to Park Lane.

He describes these early tests and the additional increase of around 2-3dB in max FOH levels over the previous year as “encouraging and significant”.

 

Personnel (left to right): Martin Audio’s Jason Baird and Chris Pyne and Capital Sound’s Ian Colville
Personnel (left to right): Martin Audio’s Jason Baird and Chris Pyne and Capital Sound’s Ian Colville

Capital Sound’s Technical Manager and Systems Designer, Ian Colville, confirmed, “It all worked well and there were no issues with the three arrays we used the new optimisation algorithm on.”

His site design replicated last year’s when the stage was reoriented through 30° to point it away from sensitive offsite areas, and included 10 delay towers (in two rings of four plus one ring of two). However, there was one exception. “We dropped a delay position [in Ring 3] which didn’t need to be there because the design of the back of the field changed,” he said.

Hyde-Park-_MG_6662-4-copy

For the main PA Capital deployed two hangs of 16 x MLA and 1 x MLD Downfill per side, with 12 x MLA and 1 x MLD Downfill for the sidefills. The sub array consisted of 21 x MLX in a broadside cardioid array, with a further 11 enclosures back facing.

The three delay rings comprised between seven and nine MLA element hangs (supported by MLD Downfill and MLX subs). Ring 3 featured eight MLA Compacts. These were set at distances from the stage of 90m, 160m and 210 metres (for the MLA Compacts). Distance from FOH to stage was 50 metres.

Capital and Martin Audio deployed a team of technical heavyweights, including Chris Pyne, who handles Martin Audio product support for SE Asia, and has worked closely with Capital since piloting Kylie Minogue’s mix in the 1990s; Capital had Dave Roden babysitting consoles, the accomplished Toby Donovan once again acting as system engineer, while Martin Connolly was the account manager.

With FOH engineers no longer worrying about trading offsite noise pollution with audience sound levels, it meant they could really focus on the mix they wanted.

Matteo Cifelli, FOH engineer for Tom Jones, who performed on the final Sunday, was equally effusive. “I was very happy with the results we achieved, the mix immediately sounded just as it was conceived,” he says.

"What's New Pussycat" - Tom Jones playing the Hyde Park fest
McBusted playing the Hyde Park Fest

“I was very pleased with the purity and musicality of the cabinet. I also appreciated the consistency in frequency response at different levels. The sound image was amongst the best I have ever heard on a large system. Even mixing off centre, I could hear all the reverbs and details of my mix clearly and the presence and sweetness on the vocals was great, in your face and never harsh.”

Jason Baird added, “What FOH engineers want at festivals is plenty of headroom and not to worry about offsite restrictions. Having reduced the low mid and LF spectrum this year, we’ve been able to further ensure this, and that means the power, depth and definition of the system can also really shine too.”

And summing up the Festival’s success, AEG Live event director, Jim King, confirmed, “Headliners at Hyde Park are now performing at levels well in excess of 100dB which was unthinkable only two years ago. This has been achieved whilst maintaining even better control at off site monitoring location and with consistently lower number of complaints from the community.”

Hyde-Park-3183-McBusted-copy
McBusted using ‘special’ lighting rigs and the fireworks

 

Excerpts from Press Release

 

RESPONSES

Leave a Reply

Your email address will not be published. Required fields are marked *

More for you

Filter by
Post Page
Tutorials On The Bench Reviews Issue 94 Issue 91 News Portable Recorder Tascam Feature Live Sound Issue 86 Digital Console Midas Recording Mix Masters Issue 78 Software + Plug-ins Plug-ins Waves Microphones
Sort by
READ ONLINE NOW
Online
Issue 94