POWER AMPS FROM DYNACORD

Published On June 14, 2017 | Live Sound, News

Dynacord has released two new dual-channel power amplifier series at InfoComm 2017, the L Series and the C Series. Both series have a linear amp design with an easy-to-use accompanying software tool to allow full configuration, control, and supervision of sound systems with multiple amplifiers. The software will be available on Dynacord’s website. Four different models per series are available, with total output power ranging from 1300W to 3600W. Engineered for stability at 2Ω, they represent the cutting edge of amplifier performance and reliability in their market segment.

Dynacord L Series amps are engineered for live sound applications. C Series is specifically for permanent installation, in scenarios such as providing background or live music in bars, churches, restaurants, sports facilities, and performing arts centres. C Series is also suitable for direct drive applications with 70V/100V speaker lines, providing flexibility for a variety of install needs. Euroblock connectors allow for convenient wiring. All models also have remote power-on delay and GPIOs to interface with third-party controls.

Onboard DSP on both all models include multi-band parametric equalisers, crossovers, limiters, and delay per channel. It also has true channel grouping control with extra DSP capabilities like PEQ, GEW, and delay for each group.

L Series and C Series – maximum output power per channel:

  • C360FDi / L3600FD
    1800W @ 4Ω, 3200W @ 2Ω
  • C2800FDi / L2800FD
    1400W @ 4Ω, 2300W @ 2Ω
  • C1800FDi / L1800FD
    900W @ 4Ω, 1600W @ 2Ω
  • C1300FDi / L1300FD
    650W @ 4Ω, 1100W @ 2Ω

Dynacord: www.dynacord.com
Australian Distributor: www.boschcommunications.com.au

Leave a Reply

Your email address will not be published. Required fields are marked *